Description
|
|
|
|---|---|---|
Compatible SystemsThe scanner is compatible with Windows, Mac osx, Linux. Work with PC, laptop, tablet. Only work on device that has USB port. | Compatible Barcode TypesCapable of scanning 1D codes so you can scan phone and laptop screens, LCD screens, and more. 1D barcode compatibility: UPC, EAN, Code128, Code39, Code11, Coda bar, etc. | 2 Upload modesInstant Upload Mode: Read barcodes & upload it straight to the file you have opened. Storage Mode: when using the scanner far away the wireless signal range. Activate storage mode, all scanned barcode will be stored directly into the bulit-in memory of the scanner. You can upload the data to your device when you need it. Internal offline storage supports up to 50000 barcodes. |
|
|
|
|---|---|---|
Plug and PlayNo need to install any drive software,The device only needs to use to support the USB port. It also has manual scan mode and automatic scan mode. Manual Mode : Scanner starts reading after pressing the trigger. Automatic Scan Mode : When the scanner senses to the barcode, the scanning light is automatically opened for scanning barcodes.. Without pressing any trigger. (Note: Scanner defaults to manual scan mode) | Compatible DeviceWork with computer . Compatible with Windows, Mac OS,Linux. NOTE : Only work on device that has USB port, not for iPad, smart phone. Not compatible with Bluetooth function. Not completely compatible with Square POS. | Add prefixes/ suffixesAdding keyboard keys (CR/ENTER, TAB) to the scanning process. Turning on or off barcode types. Turning on or off buzzer. Turning on or off vibration. Adding prefix or suffix for the bar codes. |
Wireless 1D Barcode Scanner with below features:
1. Bar code scanner reads all 1D bar codes directly off the LCD screen of computers or mobile devices and also reads poorly printed or damaged bar codes.
2. 2.4G wireless Connection Possible Signal Range of up to 50m, Internal memory of 512 KB, more than 50000 data strings;
Please note
1. All wireless barcode scanners have been tested for wireless pairing, and you only need to connect the USB receiver (dongle) to use. If you can’t connect, please try to re-pair.
2. When turning on the scanner for the first time, please use the USB cable to charge it (approximately 2 hours).
3. If the scanner does not work, please consult our manual. Feedback your question to us, and we will reply you within 12 hours after seeing the information.
There are no reviews yet.